Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle Item # AL57575 does not have the internal jounce bumper. Those are found in the Air Lift LoadLifter 5000 Ultimate Air Helper Springs line such as # AL88275.
The Air Lift LoadLifter 7500 XL Air Helper Springs # AL57575 have Air Lift's exclusive upper and lower roll plates which are basically the same in all the LoadLifter kits.
I agree with your solutions to the problem: moving weight around and adding additional support. You could... view full answer...
I confirmed with my contact at Taylor Made that the Taylor Made Marine Gas Strut for Boat Hatches - 10 mm Socket # 3691834-20 does not come with the 10mm ball. If you need just the ball, I recommend the # TM73FR. We also sell the brackets with the balls already installed with part # 3691881.
We recommend that if your boat lockers uses two lift supports, you should always replace them as a pair. Typically, if one support is losing charge from use as it ages, both supports are in a similar... view full answer...
Yes, the Lippert Scissor Stabilizer Jacks # LC285326 is a set of two jacks with a 24 inch lift, maximum load capacity of 10,000 lbs (5,000 lbs per jack). The jacks have a collapsed height of 4-1/4 inches and extended height of 24 inches, providing a total of 24" of lift.
Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the... view full answer...
The Trailer Valet JXS Trailer Jack part # TV64FR comes with a footplate only. There isn't an exact fit wheel option for this jack but there are likely other options that will work. That said, these wheels reduce the lift/support capacity of the jack quite substantially.
The Removable, 6" Poly Caster Assembly part # JC-101 would be a compatible add-on wheel option limited to 1,200 lbs. view full answer...
The Stromberg Carlson 100 Series 5th Wheel Tailgate # VGM-88-100 does not come with any kind of cable or strap to hold it, it just has hinges to allow you to lift and lower it. These tailgates are not designed to bear weight so you shouldn't climb on them or load them up with anything.
You certainly can have someone paint it, but it only comes in black so you would have to find someone locally to paint it.
You have a 2007 Ford F-250 listed as your vehicle, if this is the vehicle you... view full answer...